This article talks about how to write a executable application for the device tree driver that was just written. For related subjects, please refer to…
This article talks about how to use the echo command in user space to implement GPIO for a device tree driver. For related subjects, please…
This article talks about the parsing of the device tree during kernel boot. For related subjects, please refer to the SOC Table of Contents. …
This article talks about how to use GPIO to control the LED lights on the development board, and how to incorporate the buttons into the…
This article talks about how to use the open read and close commands to implement Linux PS Uart, as well as adding axe uart IP…
This article talks about how to implement Linux PS Uart and PL Uart by writing an executable application. For related subjects, please refer to the…
This article talks about how to implement Linux PS Uart and PL Uart via User Space shell commands. For related subjects, please refer to the…
This article talks about other commonly used U-Boot commands that were not covered previously. For related subjects, please refer to the SOC Table of Contents.…
This article talks about the U-Boot system boot commands which allow for various methods to boot the development board, such as remote booting, that are…
This article talks about the U-Boot FAT and EXT file type commands that are used most commonly. For related subjects, please refer to the SOC…
This article talks about the U-Boot EMMC and SD card operation commands that are used most commonly. For related subjects, please refer to the SOC…
This article talks about the U-Boot commands that allow for operations on the network, such as booting remotely. For related subjects, please refer to the…
This article talks about the commands that allow the user to obtain information about the environment and modify the environment variables. For related subjects, please…
This article talks about the commands that allow the user to obtain information about the environment and modify the environment variables. For related subjects, please…
This article talks about the commands that allow the user to pull up command documentation, as well as various search methods. For related subjects, please…
This article briefly introduces U-Boot and how to use it. For related subjects, please refer to the SOC Table of Contents. *In order to…
This article talks about how to use WinSCP to transfer files between Windows and Ubuntu. For related subjects, please refer to the SOC Table of…
This article talks about how to use SCP to transfer files in Ubuntu Linux. For related subjects, please refer to the SOC Table of Contents.…
This article talks about how to use RCP to transfer files in Ubuntu Linux. For related subjects, please refer to the SOC Table of Contents.…
This article talks about how to connect to the Development Board using PuTTY and booting the system from the SD card. As well as using…
This article talks about how to set up the SD card to be able to successfully boot into the system on the Development Board. For…
This article talks about how to set up PetaLinux to be able to successfully go on to develop apps and drivers for the development board.…
This article talks about how to set up PuTTY to monitor and control Development Boards. For related subjects, please refer to the SOC Table of…
This article talks about the commands and steps needed to set up and use NFS and SSH in Ubuntu Linux. For more on this subject,…
This article talks about the commands and steps needed to set up a TFTP server in Ubuntu Linux. For more on this subject, please refer…
This article talks about the commands used for Linux disk management. For more on this subject, please refer to the SOC Table of Contents. …
This article talks about the basic concepts with regards to Linux disk management. For more on this subject, please refer to the SOC Table of…
This article talks about the basic commands needed to manage Ubuntu permissions. For more on this subject, please refer to the SOC Table of Contents.…
This article talks about managing Ubuntu user system’s permissions and its basic commands. For more on this subject, please refer to the SOC Table of…
This article talks about the Ubuntu user system and its basic commands. For more on this subject, please refer to the SOC Table of Contents.…
This article talks about how to search for files in Ubuntu Linux. For more on this subject, please refer to the SOC Table of Contents.…
This article talks about how to compress and decompress files using the graphical interface in Ubuntu Linux. For more on this subject, please refer to…
This article talks about how to compress and decompress files using the graphical interface in Ubuntu Linux. For more on this subject, please refer to…
This article talks about the basic file operations commands in Linux. For more on this subject, please refer to the SOC Table of Contents. …
This article talks about the basics of different Linux file system structures. For more on this subject, please refer to the SOC Table of Contents.…
This article talks about the basics of different Linux file system types. For more on this subject, please refer to the SOC Table of Contents.…
This article talks about the basics of text-editing in Ubuntu using Gedit and VIM, and its commonly used commands. For more on this subject, please…
This article talks about the basics about the APT Download Tool, and its commonly used commands. For more on this subject, please refer to the…
This article talks about the basic commands that can be used in the Ubuntu Shell, which provides a basis for all future commands. For more…
This article talks about the basic operations that can be used in the Ubuntu Shell, which provides a basis for all future commands. For more…
Tutorials of all the essential commands in Ubuntu for embedded development. Shell Commands and Operands Basic Shell Operations Common Shell Commands APT Download Tool…